Facebook

Twitter

StumbleUpon

Email

vote downundo vote up flag

jakeludington.com - 4/11/2009

DIY Bottle Cap Tripod

—

These step-by-step instructions for creating a digital camera tripod from a Pepsi bottle are inspired by the Bottle Cap Tripod for Digital Camera From Japan as featured in Gizmodo . Below is my original concept, which was later modified to the version above because the machine screw spun on the ...

1

hackedgadgets.com - 4/11/2009

DIY Bottle Cap Tripod

— hackedgadgets.com —   I did some looking around after posting about this cool Bottle Cap Tripod and found a DIY Bottle Cap Tripod version that is right along the lines of what I would make. "Master parts list: 1 1/4-inch Stainless steel washer 1 ... (more) DIY Bottle Cap Tripod

Comments vote downundo vote up GEARFUSE found this 4/11/2009found this

Leave a Comment

DIY Bottle Cap Tripod
Hacked Gadgets - DIY Tech Blog —   I did some looking around after posting about this cool Bottle Cap Tripod and found a DIY Bottle Cap Tripod version that is right along the lines of what I would make. "Master parts list: 1 1/4-inch Stainless steel washer 1 1/4-20×1 1/2-inch stainless steel pan head machine screw 1 1/4-20 Bar Knob 1 1/4-20 stainless steel lock nut 1 lid from a 20oz bottle Tools required: Drill with 1/4-inch bit Screwdriver Wrench All ...

Make Your Own Bottle Cap Camera Tripod
GEARFUSE — ... just to do it yourself, which is so much more fun anyway. You’ll need a few tools and supplies, but the total cost of the construction supplies makes this DIY extremely appealing. You’ll be spending about $3 total on the parts you’ll need, not including the soda, which hopefully won’t knock you over budget. Link [ ...