wiki.wiimoteproject.com - 11/23/2008
—
From Wiimote Wiki Register Memory Map UNKNOWN: Wii uses values: 2 (standard) and 7 (max sensitivity). No known function. MAXSIZE: Maximum blob size. Wii uses values from 0x62 to 0xc8. GAIN: Sensor Gain. Smaller values = higher gain. GAINLIMIT: Sensor Gain Limit. Must be less than GAIN for camera ...
kako.com - 11/23/2008
—
kako.com —
You can connect to the Wii remote over
bluetooth or use an Arduino to send peripheral data
to the Wiimote, but what if you want to interface directly with the Wiimote's IR camera? The sensor is particularly good at tracking coordinates for 1 to 4 ...
(more)
Hacking the Wiimote IR camera
kako.com - 11/23/2008
—
kako.com —
You can connect to the Wii remote over
bluetooth or use an Arduino to send peripheral data
to the Wiimote, but what if you want to interface directly with the Wiimote's IR camera? The sensor is particularly good at tracking coordinates for 1 to 4 ...
(more)
Hacking the Wiimote IR camera
Comments
Blog Reactions
Hacking the Wiimote IR camera
MAKE Magazine: hacks —
... with sensitivity setting:
The author defined 5 sensitivity levels, and there are four parameters (p0, p1, p2, p3) that are adjusted for each level. Here are the settings:
Level 1: p0 = 0x72, p1 = 0x20, p2 = 0x1F, p3 = 0x03
Level 2: p0 = 0xC8, p1 = 0x36, p2 = 0x35, p3 = 0x03
Level 3: p0 = 0xAA, p1 = 0x64, p2 = 0x63, p3 = 0x03
Level 4: p0 = 0x96, p1 = 0xB4, p2 = 0xB3, p3 = 0x04
Level 5: p0 = 0x96, p1 = 0xFE, p2 = 0xFE, p3 = 0x05
Quoting the Wiimote Wiki IR sensor page, these parameters correspond to:
p0: MAXSIZE: Maximum blob size. ...
Hacking the Wiimote IR camera
MAKE Magazine —
... with sensitivity setting:
The author defined 5 sensitivity levels, and there are four parameters (p0, p1, p2, p3) that are adjusted for each level. Here are the settings:
Level 1: p0 = 0x72, p1 = 0x20, p2 = 0x1F, p3 = 0x03
Level 2: p0 = 0xC8, p1 = 0x36, p2 = 0x35, p3 = 0x03
Level 3: p0 = 0xAA, p1 = 0x64, p2 = 0x63, p3 = 0x03
Level 4: p0 = 0x96, p1 = 0xB4, p2 = 0xB3, p3 = 0x04
Level 5: p0 = 0x96, p1 = 0xFE, p2 = 0xFE, p3 = 0x05
Quoting the Wiimote Wiki IR sensor page, these parameters correspond to:
p0: MAXSIZE: Maximum blob size. ...
Related: wiimote ir sensor
eCost Black Friday Wiis Only $99.00 —
Gear Live
If you don’t yet have a Wii, head over to eCost on Black Friday, where they will be offering one each hour for $99.00. Beginning tomorrow at 8:00 a.m. EST, the 10 units come with a sensor bar, stand, WiiMote, Nunchuck and Wii Sports. Look for it in the Bargain Countdown section. ...
TrueMotion 3D enables true motion control —
Engadget
While the Wiimote opened the door to motion-sensitive gaming, it's obvious limitations even have Nintendo pushing the tech forward with add-ons like the MotionPlus -- but a company called Sixense might have leapfrogged the field with a system called TrueMotion 3D. Rather than relying solely ...
Follow GadgetBlips on Twitter
